That example targets a combination of three boards: the The demo applications can be built with either MPLAB X (XC8), Atmel StudioĪ more advanced example application is available from Atmel START. The FreeRTOS demo applications for the AVR DA microcontroller (blinky demo, minimal demo, full demo) all target theĪVR128DA48 Curiosity Nano evaluation kit. The XC8 and AVR-GCC compilers are integrated into the Microchip MPLAB X and the Atmel Studio 7 IDEs. (5.40 with device pack AVR-Dx_DFP 1.2.52)įor the AVR-GCC port and the demo application projects The following IDE versions were used to develop and test the ports: The versions used to develop the ports are shown in parentheses: Ports are available for three different compilers. So there is more than enough SRAM left for communicationīuffering, advanced algorithms and other SRAM intensive parts of the application. In addition to the idle task, requires approximately 2 KB of SRAM. The size of the FreeRTOS demo depends on the compiler used, but in theįull Demo configuration it requires around 15 KB of program memory or less. These demos and examples are configured for the AVR128DA48, which has 128 KB Flash and 16 KB SRAM-enough memory forĪpplications with a high number of real time tasks. Ports are available for Atmel AVR-GCC, XC8 and This page describes the ports for the AVR Dxįamilies, which include the AVR DA and the AVR DB families. There are multiple FreeRTOS ports for the Microchip AVR microcontrollers. STM32U5 Arm Cortex-M33 MCU w/ TrustZone & TF-M.i.MX RT1060 Arm Cortex-M7 MCU & EdgeLock SE050.
0 kommentar(er)
